X24 X-Effects

Only %1 left
SKU
X24-XEFFECTS
Manufacturer
Rosco

This truly amazing projector provides large scale rippling light effects previously unavailable to lighting designers. The device utilizes a 200 watt Enhanced Metal Arc source, whose short arc allows for an output of 5K lumens, with a 7000 hour lamp life. The color temperature is similar to a Xenon source at 6000K.

The effect itself is created by rotating two "X" size glass gobos off center of the optical path. This results in a projection that does not appear to have a visible direction or pattern. The color slot will accept dichroic color filters.

Lens trains are available in 19, 30, 50 and 70-degree configurations. Due to the efficiency of the lamp and the design of the optics, all lenses have crisp edges, even for long throws of 100 feet or more.

The X24 X-Effects Projector has DMX on board. Using five DMX channels, the unit has full control of each effect gobo, lamp strike and light output. The DMX-controlled douser, also initiated through your lighting control board, directs not only the light output but blackouts and fades as well.

General Specifications:

Finish: Black

Weight: 18.1 lbs (8.21kg)

Width: 12" (30.5cm)

Length: 14" (35.5cm)

Height: 7" (18cm)Yoke mounted

Supply voltage: 100-240 VAC 50/60hz
16/3 IEC cord set
Ushio E-mark Lamp, 200 Watt DC ultra short arc
Metal Halide: 7000 hour lamp life
5000 initial lumen output
100-50% electronic dimmable

More Information
Manufacturer Rosco
  • Re-tooled drive connections between the motor and the effects glass eliminate slipping and skipping in long running installations
  • Custom made idler guides withstand wear and maintain ultra smooth gobo rotation
  • Drive belts have been formulated in a UV / ozone resistant material and built for significantly longer duty cycle, estimated at 18 months between maintenance or replacement
  • Effects Glass mounts are now designed with wide-gauge rounded shoulders for quiet but smooth operation
  • A modified lamp allows for 7000 hour lamp life with no drop in luminous output
  • 4 Framing shutters allow beam shaping and control

Particular Specification
Dimensions (WxLxH) 12 x 14 x 7" (30.5 x 35.5 x 18cm)
Weight 8.21kg (18.1lbs)
Finish Black
Supply voltage 100-240 VAC 50/60hz
16/3 IEC cord set
Ushio E-mark Lamp, 200 Watt DC ultra short arc
Metal Halide 7000 hour lamp life
5000 initial lumen output
100-50% electronic dimmable