CONTACT US (866) 511-2739

JDC1 Strobe by GLP for Sale


Add to List

  • Overview

  • Features

  • Specifications

JDC1 Strobe
JDC1 Strobe by GLP
(May Not Be Exactly as Shown)

 
 

When you look for a strobe, you look for power and the JDC1 from GLP delivers power in excess through a versatile and highly creative design, the likes of which has never been seen before.  The JDC1 contains a traditional single tube element with an incredible clear, bright white output and combines that with a surrounding full face of RGB LED power, utilizing one-thousand, four-hundred, and forty (1,440) high quality LED's.  The possibilities are endless as these two (2) elements have independent control and can be used as separate pieces, or combined for stunning effects.

Along with working as a powerful strobe light, both the tube and the full face sections can be run continuously for high output blinder and wash light effects, which never reduce output or have thermal cutouts.  To give even more functionality, the RGB face can be divided into twelve (12) separate 'pixel' sections, and additionally the bright white tube also can be divided into twelve (12) sections and then the whole array can be fully pixel mapped through any standard controller.

The JDC1 features dynamic movement with a 16-bit, 185° tilt range, allowing you to place effects exactly where and when you want them to be - and get the most possible power and impact.  The JDC1 is a whole new class of strobe that offers an incomparable feature-set that goes far beyond the definition of a hybrid.

Particular Specification
Dimensions (LxWxH) 150 x 390 x 251mm (5.9 x 15.3 x 9.8")
Weight 11.6kg (25.6lbs)
Strobe Panel LEDs
LED Type Osram LRTB GVTG
LED Count 1320
LED Colors RGB
LED Segments Twelve (12) (2 x 6)
Strobe Tube LEDs
LED Type CREE XP L LED
LED Count 216
LED Colours Cold-White
LED Segments Twelve (12)
Movement
Resolution 8 - 16-bit
Position Feedback yes
Tilt (Degrees) 185°
Control
Control Modes Compressed
HighRes
Pixel-Mapping
Display illuminated graphic LCD
Self charging buffer battery
Protocol USITT DMX-512, RDM
RDM Bidirectional communication
Cooling temperature controlled
overheating protection
Effects
Dimmer 0-100% electronic
Shutter electronic, max.  17 Hz
Colour temperature filter electronic, 2.500 K - 10.000 K
Internal Effects LED Macro Effects
Connectors
Signal connection XLR 5-Pin, In/Out
Power Input Neutrik powerCON TRUE1, In
Electrical
Mains voltage 100-240 VAC / 50-60Hz
Power 1200W @ 230V)
Fuse 20mm T 8A

   All specifications are subject to change without notice.

Get a Quote / Send Apex a Message
(required)
(required)
(required)

Terms of Use   Privacy   Send



Some Other Items in Category: Special Effects



Clear    |    Sort