CONTACT US (866) 511-2739

Studio Force V12 Phosphor by Chroma-Q for Sale


Add to List

  • Overview

  • Features

  • Specifications

Studio Force V12 Phosphor
Studio Force V12 Phosphor by Chroma-Q
(May Not Be Exactly as Shown)

The Chroma-Q Studio Force V 12 Phosphor is a 3,200 - 5,600K CCT, variable white fixture which utilises innovative LED technologies found in the Studio Force range to provide an equivalent soft edge output to a fluorescent fixture - up to 4,200 lumens - developed specifically for use in TV, film and broadcast studio environments.  Other features include fine-tuning of the green & magenta tints and frequency for camera, an extremely smooth uniform wash, extra soft beam, theatrical grade dimming and laboratory calibration to match Black Body Locus.  Designed for practicality, the unit is equipped with a manual control mode, colour touch screen interface, fanless, studio& full modes for maximum control of the units and a range of optional accessories.

Key Features

  • 3,200 - 5,600K CCT variable white
  • Variable frequency
  • Extreme output – up to 4,200 lumens
  • Extra soft beam – very wide output
  • Extremely smooth, uniform wash
  • Theatrical grade dimming
  • Ideal for film and studio applications
  • Factory calibrated to match Black Body Locus
  • 335mm / 13.2" length ideal for floor, wall or truss mounting
  • Camera friendly
  • PowerCon input and output for easy daisy chaining of fixtures
  • Broad range of accessories available, including barn door and spigot adaptor
  • Fanless, studio & full control modes
  • Intuitive colour touch screen interface
  • Flat end plates for seamless wall-washing
  • Built-in power supply
  • Hidden quick release fixings
  • Rugged extruded aluminium body

Particular Specification
Net Dimensions (H x W x L) 7.5 x 8.6 x 13.2"
190 x 218 x 335mm
Net Weight 4kg / 9lb
Power Input Rating 100-240V AC, 50-60 Hz, 160VA
Power Factor 0.998
Power Consumption 150W
Typical Power & Current Measurements done with all LEDs at maximum intensity.  Measurements made at nominal voltage.  Allow for a deviation of +/- 10%
Power Connectors In/Out PowerCon
Data Connectors In/Out XLR 5-pin
Control Protocol ANSI E1.11 USITT DMX 512-A
Cooling System Forced - 1 fan
Operating Temperature 0° to 40°C
Construction Anodised aluminum extrusion
Colour Black
Built-In Hardware Quick release lever for tilt adjustment
IP Rating IP20
LED Engines 2
LEDs Per Engine 30 (6 x RGA, 12 x B)
Total LEDs 60
Control Modes 3 channel KHL, 4 channel RGWA, 1 channel Look Sel, Manual/Mstr, Slave, Look Store
Dimming Curve Theatrical
Hot Lumen Output (Combined) 4,200 @ 5,600K; 1,750 @ 3,200K
Optics Remote phosphor panel
Beam Angle Soflight
Beam Distribution Symmetrical direct illumination
CCT 3,200K - 5,600K (+/- 200K)
Colour Gamut Performance enhanced
CRI Up to 91
Lamp Life L70 at 50,000 hours
Approvals CISPR 22/EN55022 & CISPR 24/ EN55024, CES-003 :2004 & FCC Part 15 Subpart B: 2007, CSA C22.  No.166 M1983:R2008 UL 1573:2010; UL 8750:2009

   All specifications are subject to change without notice.

Get a Quote / Send Apex a Message
(required)
(required)
(required)

Terms of Use   Privacy   Send



Some Other Items in Category: Led Fixtures



Clear    |    Sort