Add to List
60W RGBW (4 x 15W) CREE LEDs - 13° beam angle Battery powered PAR, Astera's working bull with a standard beam features 4 ultra-bright CREE LEDs and comes in a rugged, waterproof housing with a multifunctional bracket. It can be controlled with infrared remote control, AsteraApp, CRMX and/or W-DMX.
- Talkback+: Detect all available lights, set them up, check their status, configure DMX addresses and DMX profiles.
- Seamless runtime: Set the length of your event and be sure that your lights won't run out while still getting the maximum brightness.
- TruColour calibration: 100% colour consistency through any batch. It can hit exact colour temperatures and reproduce standard filter gels.
- Filming Tools: Adjustable PWM frequency to avoid flickering, green/purple balance to minimize post-production work.
- Anti-theft: The lights give visual and audible alarm and send notification to the AsteraApp if they are being moved during an event.
- DJ feature: Auto BPM analyzes the beat and matches programs to it, flash buttons can trigger special effects while being held down.
- Scheduled stand-by: Switch lights into power-saving standby and schedule them to wake up when the event starts.
- Dynamic power-boost: The dynamic power-boost feature enables the light to display the maximum brightness at all times and intensify non-white colors.
- Emergency light: Switches automatically to white light and runs of its battery when AC power is cut off.
|Total LED power||60W|
|DMX||Supports CRMX and W-DMX|
|Battery||LG Chem Lithium-ion|
|Battery Lifetime||70% after 300 cycles|
|LED Lifetime||50.000 Hours|
|Charging time (nominal)||7 Hours|
|Input Voltage||90-264V 47-63Hz|
|Dimensions||279 x 296 x 253mm|
All specifications are subject to change without notice.