Y8 Loudspeaker

Only %1 left
SKU
Y8-LOUDSPEAKER
Manufacturer
d&b audiotechnik

The compact Y8 line array loudspeaker is designed for use in vertical columns.  The 2-way passive design features two 8" drivers in a dipole arrangement and a centrally mounted 1.4" compression driver with a wave transformer.  Sophisticated horn geometry combined with the advanced bass-reflex port design delivers full bandwidth capabilities with an extended LF output.  These high performance line array modules offer 80° horizontal directivity controlled down to 500 Hz.  The mechanical and acoustical design enables vertical arrays of up to twenty four loudspeakers with vertical splay angles from 0° to 14° with a 1° resolution.  It can be used in columns of purely Y8 loudspeakers or combined with Y12 and/or Y-SUB cabinets.  The loudspeaker cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish.  The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam.  Each side panel incorporates a handle while two additional recessed grips are provided at the rear.  Three point rigging hardware is integrated into the loudspeaker enclosure.

More Information
Manufacturer d&b audiotechnik

System data  
Frequency response (-5dB standard) 54Hz - 19kHz
Frequency response (-5 dB CUT mode) 100Hz - 19kHz
Max.  sound pressure (1m, free field)
with D6/10D
with D20/30D
with D80
134dB
137dB
139dB
Cabinets per amplifier 2

Loudspeaker data  
Configuration High performance 3-way passive line array loudspeaker
Nominal impedance 8Ω
Power handling capacity (RMS/peak 10ms) 400 / 1600W
Nominal dispersion angle (horizontal) 80°
Splay angle settings 0° - 14° (1° increment)
Components 2 x 8" driver / 1 x 8" driver
1.4" exit compression driver passive crossover network
Connections 2 x NLT4 F/M
optional 2 x NL4 or 2 x EP5

Dimensions, weight  
Dimensions (H x W x D) 257 x 630 x 375 mm
10 x 24.8 x 14.8"
Weight 20kg
44lb