V12 Line Array Loudpeaker

Only %1 left
SKU
V12-LINE-ARRAY-LOUDPEAKER
Manufacturer
d&b audiotechnik

The V12 is a 3-way passive design housing 2 x 10" LF drivers, one hornloaded 8" MF driver and two 1.4" exit HF compression drivers with 2.5" voicecoils mounted to a dedicated waveshaping device.  The symmetrical dipolar arrangement of the neodymium LF drivers around the centrally mounted coaxial MF and HF components allows a smooth overlap of the adjacent frequency bands in the crossover design.  This results in an exceptional 120° horizontal constant directivity dispersion control nominally being maintained down to 250 Hz.  The mechanical and acoustical design enables flown vertical arrays of up to twenty four loudspeakers.  It can be used in columns of purely V12 loudspeakers or combined with V8s and / or with V-SUBs.

The cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish.  The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam.  Each side panel incorporates a handle, while two additional recessed grips are provided at the rear bottom of the cabinet.

More Information
Manufacturer d&b audiotechnik

System data  
Frequency response (-5dB standard) 67Hz - 18kHz
Frequency response (-5dB INFRA mode) 100Hz - 18kHz
Max.  sound pressure (1m, free field) D20/D30D - 139dB
D80 - 142dB
Cabinets per amplifier 2

Loudspeaker data  
Configuration High performance 3-way passive line array loudspeaker
Nominal impedance 8Ω
Nominal impedance side LF/MF/HF 8Ω
Power handling capacity (RMS/peak 10ms) 500 / 2000W
Nominal dispersion angle (horizontal) 120°²
Splay angle settings 0° - 14° (1° increment)
Components 2 x 10" driver / 1 x 8" driver
2 x 1.4" exit compression driver passive crossover network
Connections 2 x NLT4 F/M
optional 2 x NL4 or 2 x EP5

Dimensions, weight  
Dimensions (H x W x D) 310 x 700 x 460 mm
12.2 x 27.5 x 18"
Weight 34kg
75lb