Q7 Loudspeaker

Only %1 left
SKU
Q7-LOUDSPEAKER
Manufacturer
d&b audiotechnik

The Q7 is a 70° x 40° passive 2-way loudspeaker housing two (2) 10" low-frequency drivers and a 1.3" high-frequency compression driver with a rotatable constant directivity horn and a passive crossover network.  The two (2) 10" neodymium low-frequency drivers are positioned in a dipolar arrangement providing exceptional vertical dispersion control with the nominal angle being maintained down to 400Hz.  The Q10 can be used as a stand-alone full range system or in combination with other Q-Series cabinets ground stacked or mounted on a high stand with the Q Flying bracket.  When used in the upright configuration it has a very accurate 110° horizontal constant directivity behaviour that is maintained down to approximately 800Hz.  Its wide constant directivity performance provides remarkable transparency when used in close proximity to listeners.  It is also ideally suited to ambient and / or distributed sound reinforcement tasks where orientation within the sound field is critical.

More Information
Manufacturer d&b audiotechnik

The Q7 cabinet is constructed from marine plywood and has an impact resistant paint finish.  The front of the loudspeaker cabinet is protected by a rigid metal grill, covered with a replaceable acoustically transparent foam. 

The cabinet incorporates a pair of handles and mounted on the rear panel are two (2) NL4 connectors wired in parallel.

Components 2x10"/1.3" CD
Max.SPL (1m, free field) with D6/D12/D80 134 / 138 / 138dB SPL
Power handling capacity (RMS/peak 10ms) 400 / 1600W
Frequency response (-5dB) 60 / 100Hz - 17kHz
Nominal dispersion angle (h x v) 70° x 40° CD
Cabinets per channel D6/D12/D80 2
Dimensions mm (H x W x D) 580 x 308 x 410mm
Weight kg 22kg
Dimensions inch (H x W x D) 22.8 x 12.1 x 16.1"
Weight lb 49lbs