K10 Powered Speaker

Only %1 left
SKU
K10-POWERED-SPEAKER
Manufacturer
QSC Audio Products

The QSC K10 was created in a spectrum of active loudspeakers designed with one common goal - accurate acoustical performance for the widest selection of applications.  Ranging from a compact and potent eightinch, two-way utility loudspeaker to a fixed-arcuate line array system, all K Family models feature common power modules, DSP and performance characteristics.

Night after night, venue after venue, K10 loudspeakers provide levels of performance, flexibility, portability and reliability, unparalleled by competing loudspeaker lines.  Designed with the user in mind, every feature is thoughtfully implemented to provide both entertainer and audience a most satisfying experience.

More Information
Manufacturer QSC Audio Products

  • 10" Woofer; 1.75" diaphragm compression driver
  • 90° Nominal coverage angle
  • Maximum SPL 129dB peak
  • 1000W continuous Class D power modules in all models
  • Onboard mixer with two combo XLR and ¼" inputs, and stereo RCA inputs, (three (3) audio input sources); two direct channel outputs and single summed balanced output
  • Extensive DSP enhances system performance
    • DMT (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
    • Intrinsic Correction, first featured in our high-end line-array products maps 65-75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target.  The result is a speaker that behaves equally well across the entire sound field.
    • DEEP  and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
    • GuardRail protection protects both the amplifier module and your performance from unnatural and destructive clipping.
  • Rugged ABS enclosures
  • Functions as a monitor wedge

Particular Specification
Configuration Multipurpose 2-way
Transducers
Low-frequency
High-frequency

10" cone transducer
1.75" diaphragm compression driver
Frequency Response (-6 dB) 60Hz - 18kHz
Frequency Range (-10 dB) 56Hz - 20kHz
Nominal Coverage (-6 dB) 90 conical DMT
Maximum SPL 129dB peak
Power Output 1000W continuous Class D
(500W LF, 500W HF)
2000W peak
Input Impedance
Controls Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub / Norm / DEEP), HF Mode (Flat / Vocal Boost), Front LED (On / Off / Limit)
Indicators Power, Signal A, Signal B, Standby, Limit, Mic
Connectors Balanced female XLR, " line/mic level input, Balanced female XLR, " line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
Cooling On demand, 50mm variable speed fan
Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail
Transducer Protection Thermal limiting, excursion limiting
AC Power Input 100-240VAC, 50 to 60Hz
AC Power Consumption
(1/8 of full power)
100VAC, 2.3A
120VAC, 2.01A
230VAC, 1.13A
Dimensions (HWD) 519 x 320 x 300mm
20.4", 12.6", 11.8"
Weight (Net) 32lb / 14.5kg

User's Manual (4.66 MB)
Brochure (802.82 kB)
We found other products you might like!
  1. SM58 Vocal Microphone
    SM58 Vocal Microphone
    Get a Price
  2. DJM900NXS DJ Mixer
    DJM-900NXS DJ Mixer
    Get a Price