DC-One Sound Processor
Only %1 left
SKU
DCONE-SOUND-PROCESSOR
Manufacturer
Electro-Voice
The DC-One Digital Sound System Processor by Electro-Voice ('EV') is a 2-in / 6-out processor. Whether you are permanently installing a sound system or taking a portable rig to tonights gig, the DC-One will assist you in optimizing loudspeakers for the room that they are in.
This feature-rich, 2-in / 6-out audio DSP lets you adjust equalization and crossover points, and dynamics and delays from the front panel, or from PC software, that lets you see how youre shaping your sound. Precise limiters help to protect your loudspeaker investment from any unexpected excessive signal transients. The DC-One comes pre-loaded with standard speaker configurations and custom settings for many loudspeakers in the EV line.
Manufacturer | Electro-Voice |
---|
- DC-One Editor software control via USB port
- Analog or AES/EBU Inputs
- Switchable -6dB pre-A/D converter pad
- 24-bit AD/DA conversion
- 32-bit floating point internal processing
- 111dB dynamic range
- Six (6) predefined operation configurations
- Contact closure interface for remote preset recall
- Sixty (60) factory presets, Twenty (20) user presets
- Unique edit/compare mode for audible parameter adjustment
- Highly-customizable security settings
Particular | Specification |
Weight Net | 4.6kg |
10.14lbs | |
Dimensions (H x W x D) | 44.25 x 482.6 x 355.6mm |
1.74 x 19 x 14 | |
A/D Conversion | 24-Bit Delta-Sigma, 24-bit / sigma-delta 128 times oversampling (Linear Phase) |
Analog Inputs | Two XLR, Two XLR THRU OUT |
Analog Outputs | Six (6) XLR |
Control Protocol | Front Panel USB port |
D/A Conversion | 24-Bit Delta-Sigma, 24-bit/sigma-delta 128 times oversampling |
Data Format | 25-Bit |
Digital Inputs | 1 XLR AES/EBU (2 Ch) |
Dynamic Range | 111dB (unweighted, band limited 22Hz - 22kHz) |
Electronics Type | Processor |
Frequency Response (-3dB) | 10Hz - 22kHz (0.5dB) |
Input Impedance (Balanced) | 10k |
Internal Processing | 32-Bit Floating Point |
Mains Voltage | 100-240VAC |
Maximum Input Voltage | 8.7V / +21dBu (Without -6dB Analog Pad Engaged) |
Maximum Output Voltage | 8.7V / +21dBu |
Nominal Input Voltage | 1.23V / +4dBu |
Nominal Output Voltage | 1.23V / +4dBu |
Output Impedance (Balanced) | 50 |
Power Consumption | 25W |
Sample Rate | 48kHz |
THD+N | < 0.01% (band limited 22Hz - 22kHz) |