Axient AD4Q Four-Channel Receiver
Only %1 left
SKU
AXIENT-AD4Q-FOURCHANNEL-RECEIVER
Manufacturer
Shure
D4Q Four-Channel Digital Receiver sets a new standard in spectral efficiency.
Groundbreaking performance features include wide tuning, low latency, High Density (HD) mode, and Quadversity, ensuring solid performance in the most challenging RF environments. Networked control, AES3 + AES67 + Dante output, and signal routing options bring a new level of management and flexibility to your entire workflow.
| Manufacturer | Shure |
|---|
- Wide tuning range up to 184MHz.
- True digital diversity reception per channel for drop-out resistance.
- Networked control with Wireless Workbench software and ShurePlus Channels iOS app.
- Quadversity mode for extended antenna coverage and improved RF signal-to-noise.
- Front panel headphone jack enables Dante Cue and Dante Browse monitoring.
- Configurable Ethernet switch for redundant Dante or AES67 digital output.
- Switchable XLR and AES3 outputs.
- Channel Quality meter displays RF signal-to-noise.
- Locking AC connectors.
- DC module version available to support redundant power.
| Particular | Specification |
| Dimensions (H x W x D) | 44 x 483 x 333mm 1.7 x 19.0 x 13.1" |
| Weight (without antennas) | 4.8kg 10.6lbs |
| Housing | Steel; Extruded aluminum |
| Power Requirements | 100 to 240 V AC, 50-60 Hz; 0.68 A max. |
| Thermal Dissipation | Maximum: 31 W (106 BTU/hr) Idle: 21 W (72 BTU/hr) |
| Audio Output | |
| Gain Adjustment Range | -18 to +42 dB in 1 dB steps (plus Mute setting) |
| Configuration | 1/4" (6.35 mm): Transformer-coupled Balanced (Tip=audio, Ring=no audio, Sleeve=ground) XLR: Transformer-coupled Balanced (1=ground, 2=audio +, 3=audio -) |
| Impedance Typical, XLR Line out | 100Ω |
| Full Scale Output 200kΩ load | 1/4" (6.35 mm): +8 dBV XLR: LINE setting= +18 dBV, MIC setting= -12 dBV |
| Mic/Line Switch | 30dB pad |
| Phantom Power Protection | Yes |
| Networking | |
| Network Interface | 10/100 Mbps, 1 Gbps, Dante Digital Audio |
| Network Addressing Capability | DHCP or Manual IP address |
| Maximum Ethernet Cable Length | 100m 328ft |
| Cascade output | |
| Connector Type | BNC (For connection of one additional receiver in the same band) |
| Configuration | Unbalanced, passive |
| Impedance | 50Ω |
| Insertion Loss | 0dB, typical |
| RF Input | |
| Spurious Rejection | >80dB, typical |
| Connector Type | BNC |
| Impedance | 50Ω |
| Bias Voltage (per antenna) | 12-13.5 V DC, 150 mA maximum, switchable on/off |
| RF Carrier Frequency Range Model-dependent | AD4Q=A: 470-636 MHz AD4Q=B: 606-810 MHz AD4Q=C: 750-960 MHz |