CONTACT US (866) 511-2739

CPS 2.6 MK II by Electro-Voice for Sale


Add to List

  • Overview

  • Features

  • Specifications

CPS 2.6 MK II
CPS 2.6 MK II by Electro-Voice
(May Not Be Exactly as Shown)

Designed for the contractor, the CPS 2.6 MK II feature 2-RU chassis, Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on via remote contact closures, rear panel attenuators, and a switchable 50Hz high-pass filter.  Like the CPS multi-channel amplifiers, the CPS 2.6 MK II also includes a module slot for the RCM-810 remote-control module, enabling networking features for system diagnostics and control via IRIS-Net software.

  • Up to 2 x 900W into 2W
  • Phoenix-type input and output connections
  • Remote power-on/off contact
  • Rear-mounted attenuators
  • Programmable time for custom power-on delay settings
  • Module slot for optional RCM-810 card, allowing IRIS-Net control and monitoring
  • Switchable 50Hz high-pass filter
  • Three-stage front-to-rear fans
  • Class-AB design
  • Complete protection package

Particular Specification
Weight Net 14.8kg, 32.63lbs
Dimensions (H x W x D) 88.1 x 482.6 x 421.5mm
3.47 x 19 x 16.59"
Amplifier Gain 32dB
Analog Inputs Two (2), electronically balanced, Phoenix-type
CAN Bus Interface Optional (RCM-810 card)
Continuous Rated Power
(1kHz, THD 1%) 2Ω
900W
Continuous Rated Power
(1kHz, THD 1%) 4Ω
600W
Continuous Rated Power
(1kHz, THD 1%) 8Ω
380W
Cooling Front-to-Rear, 3-stage fans
Frequency Response (-3dB) 10Hz - 40kHz (±1dB)
Mains Voltage 240, 230, 120 or 100V; 50 - 60Hz
Maximum Bridged Output 4Ω 1800W
Maximum Bridged Output 8Ω 1200W
Network Control (IRIS-Net) Optional
Slew Rate 26V/µs
Topology Class-AB

   All specifications are subject to change without notice.

Get a Quote / Send Apex a Message
(required)
(required)
(required)

Terms of Use   Privacy   Send



Some Other Items in Category: Amplifiers



Clear    |    Sort