S31 Audio Console
The Digico S31 consists of a worksurface, an audio engine and a range of onboard inputs and outputs. It can be connected using optional DiGiCo DMI Cards to a variety of DiGiCo racks and other audio input/output devices.
The console worksurface consists of three (3) sections that can be configured to control up to forty (40) mono or stereo input channels, ten (10) VCAs, sixteen (16) mono or stereo busses plus a Master buss and a ten (10) Input x eight (8) Output Matrix. All three (3) sections have ten (10) assignable faders and ten (10) sets of assignable on-screen channel controls, the right hand section also has a dedicated Master fader and mute, a Master/Solo meter, a set of six (6) assignable encoder/switches and worksurface navigation controls.
The console's buss architecture is dynamic, and can support mono and stereo configurations. Multiple console setups can provide: Front of House and Monitoring with shared stage racks and gain tracking.
| Manufacturer | DiGiCo |
|---|
- 48 Flexi Input Channels
- 16 Flexi Aux / Sub-Group Busses
- LR Master Bus
- 10 x 8 Full Processing Matrix
- 2 Solo
- 4 (To Follow) Dynamic Equalizers
- 4 Assignable DiDiTuBes
- 4 Assignable Multiband Compressors
- 8 Digital FX
- 16 Assignable Graphic Equalizer
- Optional Waves Integration
- 96kHz Sample Rate
| Particular | Specification |
| Dimensions (WxDxH) | 1023 x 586 x 295mm 40.3 x 23.1 x 11.6" |
| Weight | 25kg 55.11lb |
| Faders | 31 x 100mm touch-sensitive, motorised |
| Screens | 3 x 10" LCD high - resolution multi-touch screens |
| Audio Specifications | |
| Sample Rate | 48kHz, 96kHz |
| Processing Delay | 2ms Typical @ 48k(60 Stereo Channels, Stage |
| Input Through | L-R Buss to Stage Output) 1.1ms @ 96kHz |
| Internal Processing | Up to 40-bit, Floating Point |
| Converter Bit Depth | A>D & D>A 24-bit |
| Frequency Response | ±0.6dB (20Hz - 20kHz) |
| THD | <0.05% @ Unity Gain, 10dB Input @ 1kHz |
| Channel Seperation | Better Than 90dB (40Hz - 15kHz) |
| Residual Output | <90dBu Typical |
| Noise | 20Hz - 20kHz |
| Microphone Input | Better Than -126dB Equivalent Noise |
| Maximum Output Level | +22dBu |
| Maximum Input Level | +22dBu |
| General Specifications |
| 46 busses: 16 x flexi-busses Mono/Stereo (equivalent of 32 DSP busses), Stereo Master (2), Solo busses (2 stereo, 4 total), and 10 x 8 Matrix (8) |
| 10 x Control Groups |
| 1 x Compressor per channel and buss |
| 1 x Gate per channel and buss (switchable to ducker, or compressor with side chain access) |
| 16 x assignable 32 band Graphic EQs |
| 8 x FX engines (reverbs, delays, w/modulation and enhancer) |
| 4 x assignable DiGiTuBes |
| 4 x assignable Multiband Comps |
| User definable Macros |
| An extremely high power headphone amplifier with 1/4 inch and mini jack socket |
| 96kHz as standard |
| 24 mic line inputs |
| 12 analogue outs |
| 2 AES I/O (mono) |
| Word Clock I/O |
| 1 GPI and 1 GPO |
| DVI out (for an external monitor) |
| 2 DMI Card slots (up to 64 I/O per slot) |
| 2 Ethernet connections for Networking |
| 2 x 24 segment master/solo meters |
| Touch sensitive rotaries with integrated switch & HTL |
| 3 x multi-touch screens |
| 31 x touch sensitive moving faders |
| 4 x layers of banks of 10 faders |
| Customisable bank and channel layout |
| Snapshots |
| Integrated USB2 Audio I/O interface for recording and playback of up to 48 channels 40 x Input flex-channels Mono/Stereo (equivalent of 80 DSP channels) |
