CPS 2.6 MK II
Only %1 left
SKU
CPS-26-MK-II
Manufacturer
Electro-Voice
Designed for the contractor, the CPS 2.6 MK II feature 2-RU chassis, Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on via remote contact closures, rear panel attenuators, and a switchable 50Hz high-pass filter. Like the CPS multi-channel amplifiers, the CPS 2.6 MK II also includes a module slot for the RCM-810 remote-control module, enabling networking features for system diagnostics and control via IRIS-Net software.
| Manufacturer | Electro-Voice |
|---|
- Up to 2 x 900W into 2W
- Phoenix-type input and output connections
- Remote power-on/off contact
- Rear-mounted attenuators
- Programmable time for custom power-on delay settings
- Module slot for optional RCM-810 card, allowing IRIS-Net control and monitoring
- Switchable 50Hz high-pass filter
- Three-stage front-to-rear fans
- Class-AB design
- Complete protection package
| Particular | Specification |
| Weight Net | 14.8kg, 32.63lbs |
| Dimensions (H x W x D) | 88.1 x 482.6 x 421.5mm 3.47 x 19 x 16.59" |
| Amplifier Gain | 32dB |
| Analog Inputs | Two (2), electronically balanced, Phoenix-type |
| CAN Bus Interface | Optional (RCM-810 card) |
| Continuous Rated Power (1kHz, THD 1%) 2Ω | 900W |
| Continuous Rated Power (1kHz, THD 1%) 4Ω | 600W |
| Continuous Rated Power (1kHz, THD 1%) 8Ω | 380W |
| Cooling | Front-to-Rear, 3-stage fans |
| Frequency Response (-3dB) | 10Hz - 40kHz (±1dB) |
| Mains Voltage | 240, 230, 120 or 100V; 50 - 60Hz |
| Maximum Bridged Output 4Ω | 1800W |
| Maximum Bridged Output 8Ω | 1200W |
| Network Control (IRIS-Net) | Optional |
| Slew Rate | 26V/µs |
| Topology | Class-AB |
