DCM1-e Zone Mixer

Only %1 left
SKU
DCM1E-ZONE-MIXER
Manufacturer
Cloud Electronics

The DCM1e is a new Ethernet version of the popular DCM1 Digital Control Zone Mixer.  The addition of an ethernet port on the rear panel of the new DCM1e allows its own on-board web-server to be connected via an RJ-45 socket to an independent or existing switch or router, enabling the new DCM1e to be configured and controlled remotely by any mobile device, or any PC connected to the same network.

Using the web browser of any mobile device, users have "limited installer defined" controls via simple and intuitive interface pages.  Power users are provided with additional installer defined controls, whilst Installers have administrator status via a password protected "Configuration Options" screen.

Multiple devices can connect and operate the DCM-1e concurrently, providing complete flexibility and control for up to eight (8) separate zones, if required.

More Information
Manufacturer Cloud Electronics
  • 8 stereo line inputs (1 balanced), with input level trims (via menu system)
  • 8 balanced line outputs (2 stereo + 6 mono)
  • Any source may be routed to any zone at any level
  • 4 Extension Ports for optional remote line input modules (balanced or unbalanced), using Cat 5 UTP cable
  • 4 Mic Inputs for optional remote mic input modules, using Cat 5 UTP cable
  • External inputs (mic or line) may be routed to any zone
  • RJ45 interface for Cloud PM Series digital paging microphones
  • Separate analogue paging mic input with standard short-toground zone selection
  • Paging to all zones with fully programmable override logic
  • Supports up to 100 CDR-1 Remote Controls (optional), in any wiring configuration, using Cat 5 UTP cable
  • Remote control of source, level, EQ and group enable via CDR-1 plates
  • 2 x 16 character LCD dot-matrix display (both DCM1/DCM1e and CDR-1)
  • Four definable zone groups; groups have same selection options as zones
  • Any line input may have priority in any zone; configurable perzone
  • Configurable source selection restriction, per-zone
  • Key-protected Installer mode (both DCM1/DCM1e and CDR-1) prevents user access to configuration menus
  • Inputs, zones and groups can be named
  • RS232 interface for control by third-party control systems
  • Paging access port may be reconfigured as eight GPIO ports, under RS-232 or Ethernet (DCM1e only) control
  • Front-panel LEDs confirm remote access
  • Optional per-zone EQ cards to suit a range of popular installation loudspeakers
  • Software Configuration Tool available (free download) to permit easy configuration from a computer
  • Self-contained - can be fully configured and controlled without a computer if preferred
  • Multiple mixers may be cascaded to create larger systems
  • External Music Mute input for interfacing with emergency systems
  • Any input (mic or line) may be assigned as Emergency Input, overriding Music Mute
  • 2U 19 rack-mounting unit
  • Ethernet port with internal web server
  • Control over main user functions from web-capable devices
  • Extended range of password-protected functions
  • Ethernet to RS232 bridge may be used to send commands to third-party equipment 

Particular Specification
Weight Net 3.12kg
7lbs
Dimensions (H x W x D) 88 x 482.6 x 170mm
3.5 x 19 x 6.6
External Supply Input 100V-240V AC; 47-63 Hz; 1.35 A
Power supply +12V, 3A; -12V 1A
Balanced Zone Outputs 775mV (0 dBu)
Minimum load impedance 600
Maximum output level +10dBu (2.6V)
Frequency Response 20Hz - 20kHz 1dB
Distortion <0.05%, 20Hz - 20kHz
Sensitivity 195mV (-12dBu) to 3.1V (+12dBu)
Input Gain Control 24dB range
Input Impedance 47k
Headroom >+10 dB
Noise -90dB A weighted (0dB gain)
Equalisation HF: 14 dB/10k Hz
MID: 14 dB/1200 Hz
LF: 14 dB/50 Hz

Manual (5.32 MB)